To display 3D chart, select the 3D View checkbox on the Chart tab of the side panel.
The 3D effect looks as follows:
The following approaches can be used to set up 3D view:
Quick setup. Use the 3D View and Gaps tab on the side panel.
Advanced setup. Use the 3D View tab in the Chart Parameters dialog box.
The chart appearance with various gap settings between series is given in the Examples of Various Gaps between Series Settings section.
To set up chart 3D view, use the 3D View and Gaps side panel tab.
NOTE. The 3D View and Gaps tab is available only for 3D histograms, 3D histograms with groups, 3D linear and mixed charts.
Set the following parameters:
Chart depth. Determine chart depth size. Available values range: [20; 2000].
Space depth. Determines the distance from the chart front and background border to series. Available values range: [0; 500].
Advanced setup enables the user to determine 3D view parameters for more chart types.
For advanced set up 3D view of the chart, go to the 3D View tab of the Chart Parameters dialog box. The tab is displayed if 3D chart view is enabled.
NOTE. 3D chart view setup using the Chart Parameters dialog box is available only in the desktop application for any chart type except for radar, scatter and stepped charts.
Set the following parameters:
Chart depth. Determine chart depth size. Available values range: [20; 2000].
Space depth. Determines the distance from the chart front and background border to series. Available values range: [0; 500].
Example of the histogram with chart depth 100 (left) and 1000 (right):
Example of the histogram with gap width 10 (left) and 500 (right):
See also:
Setting Up 3D View and Gaps | Chart Types | Setting Up General Chart Parameters
To display the tab