Ms Assembly Interfaces

	Interface	Brief description
	ICalculateModelScheduledTask	The ICalculateModelScheduledTask interface is used to work with a task calculating modeling problem in the scheduled tasks container.
	IDescStatsBox	The IDescStatsBox interface contains properties and methods of the DescStatsBox development environment component.
	IDmAttributesDetails	The IDmAttributesDetails interface is used to work with factors used in data mining.
	IDmBackPropagation	The IDmBackPropagation interface is used for missing data substitution using the back-propagation network.
	IDmClusteringDetails	The IDmClusteringDetails interface is a base class used to work with data mining clustering methods.
	IDmAssociationRules	The IDmAssociationRules interface is used for data mining by means of the Association Analysis method.
	IDmDataSource	The IDmDataSource interface is used to work with the data mining data source.
	IDmDecisionTree	The IDmDecisionTree interface is used for missing data substitution using the decision tree.
	IDmDiscriminantAnalysis	The IDmDiscriminantAnalysis interface is used for missing data substitution using discriminatory analysis.
	IDmField	The IDmField interface is used to work with a data source field
	IDmForecasting	The IDmForecasting interface is used to perform the Forecasting data mining anaysis.
	IDmForestDetails	The IDmForestDetails interface is used to work with decision tree ensemble settings on data mining.
	IDmGradientBoostedTrees	The IDmGradientBoostedTree interface is used to set up calculation parameters of the Gradient Boosting algorithm of the Decision Tree Ensembles method on data mining.
	IDmHighlightExceptions	The IDmHighlightExceptions interface is used to perform the Exception Search data mining analysis.
	IDmKeyInfluences	The IDmKeyInfluences interface is used to perform the Key Factors data mining analysis.
	IDmKmodesClusterAnalysis	The IDmKmodesClusterAnalysis interface is used for data clustering using the K-modes clustering.
	IDmLanerDataSource	The IDmLanerDataSource interface is used to work with a time series database workbook that is a data source for data mining.
	IDmLogisticRegression	The IDmLogisticRegression interface is used for missing data substitution using logistic regression.
	IDmMethod	The IDmMethod interface is used to work with data mining methods.
	IDmMethodCrossValidation	The IDmMethodCrossValidation interface is used to set up cross-validation parameters.
	IDmMethodDetails	The IDmMethodDetails interface is used to work with data mining method basic settings.
	IDmPivotTableDataSource	The IDmPivotTableDataSource interface is used to work with a data table that is a data source for data mining.
	IDmRandomForest	The IDmRandomForest interface is used to set up calculation parameters of the Random Forest algorithm of the Decision Tree Ensembles method on data mining.
	IDmReport	The IDmReport interface is used to work with the report containing data mining results.
	IDmReportDataSource	The IDmReportDataSource interface is used to work with the regular report as the data mining data source.
	IDmReports	The IDmReports interface is used to work with the collection of reports containing data mining results.
	IDmSelfOrganizingMap	The IDmSelfOrganizingMap interface is used for data clustering using the Kohonen self-organizing maps.
	IDmTableDataSource	The IDmTableDataSource interface is used to work with the data mining table data source.
	IDmTargetDetails	The IDmTargetDetails interface is used to work with the data analyzed by data mining.
	IDmTemplateFillDetails	The IDmTemplateFillDetails interface is used to work with missing data substitution methods used in data mining basic settings.
	IModelBox	The IModelBox interface contains properties and methods of the ModelBox development environment component.
	IModelBoxEditObjectEventArgs	The IModelBoxEditObjectEventArgs interface contains argument properties of the event that occurs when a model opens for edit in the ModelBox component.
	IModelling	The IModelling interface contains methods used to transform variables.
	IModelBoxPad	The IModelBoxPad interface contains panel properties of the ModelBox component.
	IModelBoxPads	The IModelBoxPads interface contains properties and methods used to work with the panels collection of the ModelBox component.
	IModelBoxUpdateEventArgs	The IModelBoxUpdateEventArgs interface contains argument properties of the event, that occurs when parameters of the model that is displayed in the ModelBox component, are modified. Interface is reserved for future.
	IMs2SLSTransform	The IMs2SLSTransform interface contains properties and methods that determine model calculation parameters by means of the Linear Regression (Instrumental Variables Estimation) method.
	IMsAggregationFilter	The IMsAggregationFilter interface includes properties used to work with aggregation filter.
	IMsAggregationFilterList	The IMsAggregationFilterList interface includes properties and methods used to work with the collection of aggregation filters.
	IMsAggregationGroup	The IMsAggregationGroup interface contains properties and methods used to work with aggregation group.
	IMsAggregationGroups	The IMsAggregationGroups interface contains properties and methods used to work with the collection of aggregation groups.
	IMsAggregationTransform	The IMsAggregationTransform interface contains properties and methods that determine calculation parameters for the model that aggregates or disaggregates data.
	IMsAttributesFormulasList	The IMsAttributesFormulasList interface contains properties and methods used to work with the collection of methods for calculating additional model attributes using formulas.
	IMsArimaTransform	The IMsArimaTransform interface contains properties and methods that determine model calculation parameters by the ARIMA method.
	IMsArimaResult	The IMsArimaResult interface is used to work with calculation results of the ARIMA method.
	IMsBandpassFilterTransform	The IMsBandpassFilterTransform interface contains properties and methods that determine parameters of the model using the Baxter-King filter for calculation.
	IMsBinaryRegressionTransform	The IMsBinaryRegressionTransform interface is used to set up model calculation parameters by using binary choice method (maximum likelihood estimation).
	IMsBpfResult	The IMsBpfResult interface is used to work with calculation results of the Baxter-King filter
	IMsBranchCase	The IMsBranchCase interface is used to work with condition branch in metamodel calculation chain.
	IMsBranchCaseList	The IMsBranchCaseList interface is used to work with the collection of condition branches in metamodel calculation chain.
	IMsBranchCondition	The IMsBranchCondition interface is used to work with condition of calculating a condition branch in metamodel calculation chain.
	IMsBranchConditionExpression	The IMsBranchConditionExpression interface is used to work with condition of calculating a condition branch in metamodel chain. Type of branch calculation condition: expression.
	IMsBranchConditionInGroup	The IMsBranchConditionInGroup interface is used to work with condition of calculating a condition branch in metamodel calculation chain. Type of branch calculation condition: occurrence in element group.
	IMsBranchConditionInSelection	The IMsBranchConditionInSelection interface is used to work with condition of calculating a condition branch in metamodel calculation chain. Type of branch calculation condition: occurrence in element selection.
	IMsBranchConditionNotEmpty	The IMsBranchConditionNotEmpty interface is used to work with condition of calculating a condition branch in metamodel chain. The type of branch calculation condition is that the specified series must contain data.
	IMsBranchConditions	The IMsBranchConditions interface is used to work with the collection of conditions of calculating a condition branch in metamodel calculation chain.
	IMsBranchConditionScalar	The IMsBranchConditionScalar interface is used to work with scalar condition of calculating condition branch in metamodel calculation chain.
	IMsBreakpoint	The IMsBreakpoint interface contains properties used to work with breakpoint.
	IMsBreakpoints	The IMsBreakpoints interface contains properties and methods used to work with the breakpoints collection.
	IMsCalculationChainBranch	The IMsCalculationChainBranch interface is used to work with condition in metamodel calculation chain.
	IMsCalculationChainEntries	The IMsCalculationChainEntries interface is used to work with the collection of elements, which make up metamodel calculation chain.
	IMsCalculationChainEntry	The IMsCalculationChainEntry interface contains properties of elements included into metamodel calculation chain.
	IMsCalculationChainFilter	The IMsCalculationChainFilter interface is used to work with the collection of elements calculated by a problem.
	IMsCalculationChainFolder	The IMsCalculationChainFolder interface contains properties of a folder included into metamodel calculation chain.
	IMsCalculationChainGroup	The IMsCalculationChainGroup interface is used to work with the group in the metamodel calculation chain.
	IMsCalculationChainIterator	The IMsCalculationChainIterator interface contains properties and methods used to work with cycle settings in metamodel calculation chain.
	IMsCalculationChainMetaModel	The IMsCalculationChainMetaModel interface contains properties of metamodel included into calculation chain.
	IMsCalculationChainModel	The IMsCalculationChainModel interface contains properties of a model included into calculation chain.
	IMsCalculationChainMultiDimIterator	The IMsCalculationChainMultiDimIterator interface is used to work with multidimensional iterator.
	IMsCalculationChainSystem	The IMsCalculationChainSystem interface is used to work with the system of equations containing in the metamodel calculation chain.
	IMsCalculationChainTarget	The IMsCalculationChainTarget interface is used to work with the criterion function included in the metamodel calculation chain.
	IMsCalculationChainTargetConstraint	The IMsCalculationChainTargetConstraint interface is used to work with the criterion function constraint contained in the metamodel calculation chain.
	IMsCalculationChainTargetTrajectory	The IMsCalculationChainTargetTrajectory interface is used to work with criterion function trajectory contained in the metamodel calculation chain.
	IMsCalculationChainVariable	The IMsCalculationChainVariable interface is used to work with the variable contained in the metamodel calculation chain.
	IMsCalculationChainVisualElement	The IMsCalculationChainVisualElement interface is used to work with the visual element contained in the metamodel calculation chain.
	IMsCalculationHistory	The IMsCalculationHistory interface contains properties of modeling problem calculation history.
	IMsCalculationLog	The IMsCalculationLog interface contains properties of problem calculation log.
	IMsCalculationLogRecord	The IMsCalculationLogRecord interface contains properties used to work with entries in problem calculation log.
	IMsCalculationModelTreeNode	The IMsCalculationModelTreeNode interface is used to work with the element of the modeling problem calculation tree used as a breakpoint.
	IMsCalculationState	The IMsCalculationState interface is used to work with the information about the current step of calculating the modeling problem.
	IMsCalculationTreeNode	The IMsCalculationTreeNode interface contains properties used to work with a calculation tree element.
	IMsCalculationTreeNodes	The IMsCalculationTreeNodes interface contains properties used to work with the collection of calculation tree elements.
	IMsCalendarSettings	The IMsCalendarSettings interface is used to work with the calendar level parameters.
	IMsCalculationTree	The IMsCalculationTree interface contains properties used to work with a modeling problem calculation tree.
	IMsCensus1Transform	The IMsCensus1Transform interface is used to work with a model calculated by the Census1 method.
	IMsCensus2Transform	The IMsCensus2Transform interface determines parameters of the X11 method.
	IMsChowTestSettings	The IMsChowTestSettings interface is used to work with parameters of the Chow Tests diagnostic test.
	IMsCointegrationEquationTransform	The IMsCointegrationEquationTransform interface contains properties and methods that determine parameters of the Error Correction Model method.
	IMsCollapseTransform	The IMsCollapseTransform interface contains properties and methods that determine parameters of the Collapse model.
	IMsCollapseTransformationMethod	The IMsCollapseTransformationMethod interface contains properties that determine parameters of term transformation using the Collapse method.
	IMsCompositeFormulaTerm	The IMsCompositeFormulaTerm interface contains properties and methods of a composite term.
	IMsCompositeFormulaTermList	The IMsCompositeFormulaTermList interface contains properties and methods used to work with the collection of composite terms.
	IMsCompositeFormulaTermSet	The IMsCompositeFormulaTermSet interface contains properties and methods used to work with a set of composite terms.
	IMsCompositeFormulaTermSetList	The IMsCompositeFormulaTermSetList interface contains properties and methods used to work with the collection of composite term sets.
	IMsControlProblem	The IMsControlproblem interface contains properties and methods of optimal control problem.
	IMsCrossDimensionAggregationOptions	The IMsCrossDimensionAggregationOptions interface contains properties used to set up advanced parameters of extended aggregation.
	IMsCrossDimensionAggregationTransform	The IMsCrossDimensionAggregationTransform interface is used to set up parameters of aggregation, which uses a missing data treatment method and is calculated based on a group, selection, or parameter (extended aggregation).
	IMsCumulativeTransform	The IMsCumulativeTransform interface contains properties and methods that determine parameters of a model that uses cumulative methods for calculation.
	IMsCurveEstimationTransform	The IMsCurveEstimationTransform interface contains properties and methods that determine parameters of model calculation using the universal trend method.
	IMsCustomTerm	The IMsCustomTerm interface is used to work with time and dummy variables.
	IMsDataBreakpoint	The IMsDataBreakpoint interface contains properties used to work with breakpoint, that is triggered at the determined value in data.
	IMsDataLoadingPeriod	The IMsDataLoadingPeriod interface is used to work with parameters of data loading period.
	IMsDatePeriod	The IMsDatePeriod interface is used to set up a period including two dates: period start and end
	IMsDetermAggregationTransform	The IMsDetermAggregationTransform interface contains properties and methods that determine parameters of aggregation, which is calculated as a determinate equation.
	IMsDeterministicTransform	The IMsDeterministicTransform interface contains properties and methods that determine parameters of model calculation using a determinate equation.
	IMsDFTestSettings	The IMsDFTestSettings interface is used to set up parameters of calculation of the augmented Dickey-Fuller test.
	IMsDiagnosticTest	The IMsDiagnosticTest interface is used to work with diagnostic test of a model.
	IMsDiagnosticTestList	The IMsDiagnosticTestList interface is used to work with a set of diagnostic tests of a model.
	IMsDiagnosticTestResults	The IMsDiagnosticTestResults interface is used to work with results of a diagnostic test.
	IMsDiagnosticTestSettings	The IMsDiagnosticTestSettings interface is used to work with parameters of diagnostic test execution.
	IMsDimCustomLinker	The IMsDimCustomLinker interface is used to work with custom mechanism of dimension linking.
	IMsDimensionFilter	The IMsDimensionFilter interface is used to set up parameters of the dimension, by which multiple selection is enabled
	IMsDimensionFilterList	The IMsDimensionFilterList interface is used to work with the collection of dimensions, by which multiple selection is enabled
	IMsDimIterateByDataOptions	The IMsDimIterateByDataOptions interface is used to set up parameters of iteration by data.
	IMsDimIterateByDataStub	The IMsDimIterateByDataStub interface is used to work with data source, by existing points of which iterations are executed.
	IMsDimIterateByDataStubs	The IMsDimIterateByDataStubs interface is used to work with the collection of data sources, which existing points are used for iteration.
	IMsDimIteratorAdvancedFilter	The IMsDimIteratorAdvancedFilter interface is used to work with advanced filter in multidimensional iterator dimension.
	IMsDimIteratorAdvancedFilterCondition	The IMsDimIteratorAdvancedFilterCondition interface is used to work with an advanced filter condition.
	IMsDimIteratorDimension	The IMsDimIteratorDimension interface is used to work with multidimensional iterator dimension.
	IMsDimIteratorDimensions	The IMsDimIteratorDimensions interface is used to work with the collection of dimensions, by which iteration is performed.
	IMsDimIteratorFilter	The IMsDimIteratorFilter interface is used to work with dimension filter in multidimensional iterator
	IMsDimIteratorFilteredDimension	The IMsDimIteratorFilteredDimension interface is used to work with filtering parameters of dimension, by which iteration is executed.
	IMsDimIteratorLink	The IMsDimIteratorLink interface is used to work with a linked dimension in the multidimensional iterator dimension
	IMsDimIteratorLinks	The IMsDimIteratorLinks interface is used to work with the collection of linked dimensions in the multidimensional iterator dimension
	IMsDimIteratorStubs	The IMsDimIteratorStubs interface is used to work with the collection of data sources, to which multidimensional iterator is applied.
	IMsDimOpenParamValue	The IMsDimOpenParamValue interface is used to work with the values of the parameter to open the parametric dimension.
	IMsDimOpenParamValues	The IMsDimOpenParamValues interface is used to work with the collection of values of the parameter to open the parametric dimension.
	IMsDimOpenStubParamValue	The IMsDimOpenStubParamValue interface is used to work with the parameter, which is used to open objects with parametric dimensions.
	IMsDimOpenStubParamValues	The IMsDimOpenStubParamValues interface is used to work with the collection of parameters, which are used to open the objects with parametric dimensions.
	IMsDisplayAttributeSettings	The IMsDisplayAttributeSettings interface is used to work with attribute display parameters in the string view of expression elements.
	IMsDisplayAttributeSettingsList	The IMsDisplayAttributeSettingsList interface is used to work with the collection of attribute display parameters in the string view of expression elements.
	IMsDisplaySettings	The IMsDisplaySettings interface contains properties used to work with parameters of object displaying.
	IMsECMEquation	The IMsECMEquation interface contains properties and methods determining parameters of error correction model equation.
	IMsEcmResult	The IMsEcmResult interface is used to work with calculation results of error correction model.
	IMsErrorCorrectionModelTransform	The IMsErrorCorrectionModelTransform interface contains properties and methods that determine parameters of vector error correction model.
	IMsExponentialSmoothingTransform	The IMsExponentialSmoothingTransform interface contains properties and methods that determine parameters of model calculation using the Exponential Smoothing method.
	IMsExpressionEdit	The IMsExpressionEdit interface is used to work with properties and methods of the MsExpressionEdit development environment component.
	IMsExpSmootResult	The IMsExpSmootResult interface is used to work with calculation results of the Exponential Smoothing method.
	IMsExtrapolateResult	The IMsExtrapolateResult interface is used to work with calculation results of trend with functional dependence selection.
	IMsFillGapsTransform	The IMsFillGapsTransform interface contains properties and methods that determine parameters of model calculation using the missing data treatment method.
	IMsForecast	The IMsForecast interface is used to work with forecast series parameters.
	IMsForecastingProblem	The IMsForecastingproblem interface contains properties that enable the user to set up sample period and forecasting period for a modeling problem.
	IMsForecastObject	The IMsForecastObject interface is used to work with calculation results of forecasting method.
	IMsFormula	The IMsFormula interface is used to work with the method used to calculate a model.
	IMsFormulaExecuteCallback	The IMsFormulaExecuteCallback interface is used to work with the object that provides feedback on method calculation.
	IMsFormulaStringGenerator	The IMsFormulaStringGenerator interface contains properties and methods used to work with generator of model calculation method string view.
	IMsFormulaTerm	The IMsFormulaTerm interface contains properties and methods used to determine parameters of expression elements (terms) used to set up model equation.
	IMsFormulaTermInfo	The IMsFormulaTermInfo interface contains properties and methods used to set up term parameters.
	IMsFormulaTermList	The IMsFormulaTermList interface is used to work with the collection of expression elements (terms).
	IMsFormulaTermSet	The IMsFormulaTermSet interface contains properties and methods used to work with a set of terms.
	IMsFormulaTermTransformationMethod	The IMsFormulaTermTransformationMethod interface contains properties, which determine parameters of term transformation.
	IMsFormulaTransform	The IMsFormulaTransform interface is used to set up model calculation parameters.
	IMsFormulaTransformCoord	The IMsFormulaTransformCoord interface contains properties and methods that determine parameters of coordinate in the variable, by which calculation is performed.
	IMsFormulaTransformSelector	The IMsFormulaTransformSelector interface contains properties that determine variable slice, for which the method is set upd.
	IMsFormulaTransformSlice	The IMsFormulaTransformSlice interface contains properties of variable slice.
	IMsFormulaTransformSlices	The IMsFormulaTransformSlices interface contains properties and methods used to work with the collection of variable slices.
	IMsFormulaTransformSlicesTree	The IMsFormulaTransformSlicesTree interface is used to work with the tree, which contains all dimensions that can be created in the variable.
	IMsFormulaTransformVariable	The IMsFormulaTransformVariable interface contains properties that determine parameters of variable in the model.
	IMsFormulaTransformVariables	The IMsFormulaTransformVariables interface contains properties and methods used to work with the collection of variables included in the model.
	IMsGlobalSettings	The IMsGlobalSettings interface contains properties used to work with global settings of modeling container.
	IMsGrangerTestSettingss	The IMsGrangerTestSettings interface is used to set up calculation parameters of the Granger test.
	IMsGreyForecastTransform	The IMsGreyForecastTransform interface contains properties and methods that determine parameters of model calculation using the Grey forecast.
	IMsGreyForecastResult	The IMsGreyForecastResult interface is used to with calculation results of the Grey forecast.
	IMsHodrickPrescottFilterTransform	The IMsHodrickPrescottFilterTransform interface contains properties and methods that determine parameters of a model calculated using the Hodrick Prescott filter.
	IMsHpfResult	The IMsHpfResult interface is used to work with calculation results of the Hodrick-Prescott filter.
	IMsInterindustryBalanceTransform	The IMsInterindustryBalanceTransform interface contains properties and methods used to work with the input-output balance model.
	IMsInterpolateTransform	The IMsInterpolateTransform interface contains properties and methods that determine parameters of the Interpolation model.
	IMsInterpolateTransformationMethod	The IMsInterpolateTransformationMethod interface contains properties used to determine term transformation parameters using the Interpolation method.
	IMsInversionInfo	The IMsInversionInfo interface is used to set up parameters of initial transformation performed on variable.
	IMsIteratorDimOpenParams	The IMsIteratorDimOpenParams interface is used to work with the collection of parameters used to work with metamodel cycle.
	IMsJohansenTestSettings	The IMsJohansenTestSettings interface is used to set up parameters of the Johansen test calculation.
	IMsLinearDecompositionProblem	The IMsLinearDecompositionproblem interface contains properties of problem of the Forward-Looking Forecasting type.
	IMsLinearEquationsTransform	The IMsLinearEquationsTransform interface is used to solve a system of simultaneous equations.
	IMsLinearRegressionTransform	The IMsLinearRegressionTransform interface contains properties and methods that determine model calculation parameters using the Linear Regression (OLS estimation) method.
	IMsLRXFilterTransform	The IMsLRXFilterTransform interface determines parameters of the LRX Filter model calculation.
	IMsLrxfResult	The IMsLrxfResult interface is used to work with calculation results of the LRX filter.
	IMsMatrixAggregationTransform	The IMsMatrixAggregationTransform interface is used to set up calculation parameters of the model that performs matrix aggregation
	IMsMedianSmoothingTransform	The IMsMedianlSmoothingTransform interface contains properties and methods that determine model calculation parameters using median smoothing.
	IMsMedianSmoothResult	The IMsMedianSmoothResult interface is used to work with calculation results of the Median Smoothing method.
	IMsMetaAttributeFilter	The IMsMetaAttributeFilter interface contains properties and methods of filter based on attributes.
	IMsMetaAttributeValue	The IMsMetaAttributeValue interface contains properties used to work with an attribute.
	IMsMetaAttributeValueList	The IMsMetaAttributeValueList interface contains properties and methods used to work with the collection of attributes.
	IMsMetaAttributeValues	The IMsMetaAttributeValues interface contains properties used to work with attribute values.
	IMsMetaModel	The IMsMetaModel interface contains properties of the Metamodel modeling container object.
	IMsMetaModelVisualController	The IMsMetaModelVisualController interface is used to support metamodel visual creating.
	IMsMethod	The IMsMethod interface is a base one for all model calculation methods.
	IMsMethodCalculation	The IMsMethodCalculation interface contains properties that determine parameters used to calculate a model using a selected method.
	IMsMethodSeries	The IMsMethodSeries interface is used to work with a set of available series used by method in calculations.
	IMsMissingData	The IMsMissingData interface determines parameters of missing data treatment method.
	IMsModel	The IMsModel interface contains properties and methods of the Model repository object.
	IMsModelCalculation	The IMsModelCalculation interface contains properties that determine parameters of model calculation.
	IMsModelCalculationResult	The IMsModelCalculationResult interface contains properties for viewing model calculation results.
	IMsModelCalendarBreakpoint	The IMsModelCalendarBreakpoint interface contains properties and methods used to work with a breakpoint, which is triggered by selected calendar calculation point.
	IMsModelList	The IMsModelList interface is used to work with the collection of models.
	IMsModelParam	The IMsModelParam interface is used to work with metamodel parameter.
	IMsModelParamControl	The IMsModelParamControl interface contains properties used to work with controlled parameter of metamodel contained in calculation chain.
	IMsModelParams	The IMsModelParams interface is used to work with the collection of metamodel parameters.
	IMsModelParamsControl	The IMsModelParamsControl interface contains properties and methods used to work with the collection of controlled parameters of metamodel included into calculation chain.
	IMsModelParamValue	The IMsModelParamValue interface contains properties used to work with metamodel parameter value before starting problem calculation.
	IMsModelParamValues	The IMsModelParamValues interface is used to work with the collection of metamodel parameter values before starting problem calculation.
	IMsModelPeriod	The IMsModelPeriod interface contains properties that are used to determine sample and forecasting periods.
	IMsModelSpace	The IMsModelSpace interface contains basic properties of the Modeling Container modeling container object.
	IMsModelSpaceCopier	The IMsModelSpaceCopier interface is used to copy a modeling container.
	IMsModelStringGenerator	The IMsModelStringGenerator interface contains properties and methods used to work with model's string view generator.
	IMsMovAvgResult	The IMsMovAvgResult interface is used to work with calculation results using moving average method.
	IMsMultiPadPad	The IMsMultiPadPad interface contains component panel properties.
	IMsMultiPadPads	The IMsMultiPadPads interface contains properties and methods used to work with the collection of panels of various components.
	IMsNonLinearConstraint	The IMsNonLinearConstraint interface contains properties of criterion function constraint.
	IMsNonLinearConstraints	The IMsNonLinearConstraints interface contains properties and methods used to work with the collection of criterion function constraints.
	IMsNonLinearControlFormulaTerm	The IMsNonLinearControlFormulaTerm interface contains properties and methods to work with term corresponding to controlling variable in optimal control problem.
	IMsNonLinearEquationsTransform	The IMsNonLinearEquationsTransform interface contains properties and methods used to work with a system of non-linear equations.
	IMsNonLinearRegressionTransform	The IMsNonLinearRegressionTransform interface contains properties and methods that determine parameters of model calculation, which uses the non-linear regression method.
	IMsOlsResult	The IMsOlsResult interface is used to work with calculation results of linear regression (OLS estimation).
	IMsOmittedVariablesTestSettings	The IMsOmittedVariablesTestSettings interface is used to work with parameters of the Missing Variables Criterion diagnostic test.
	IMsOptimizationFormulaTerm	The IMsOptimizationFormulaTerm interface is used to set up expression element parameters (terms) used in an optimization problem.
	IMsPairCorrelationTestSettings	The IMsPairCorrelationTestSettings interface is used to set up parameters of paired correlation coefficients calculation.
	IMsParametrizedDimension	The IMsParametrizedDimension interface is used to work with a parameterized dimension.
	IMsParametrizedDimensionAggregation	The IMsParametrizedDimensionAggregation interface is used to set up parametrized dimension aggregation.
	IMsParametrizedDimensions	The IMsParametrizedDimensions interface is used to work with the collection of parameterized dimensions.
	IMsParamProvider	The IMsParamProvider interface is used to work with object parameters.
	IMsPDLCoefficients	The IMsPDLCoefficients interface is used to work with lag variable coefficient.
	IMsPDLTermOptions	The IMsPDLTermOptions interface returns parameters of the term corresponding to lag variable.
	IMsPeriod	The Ms Assembly Interfaces interface is used to set up period.
	IMsPointwiseCollapseTransform	The IMsPointwiseCollapseTransform interface contains properties and methods that set parameters of the Collapse (Pointwise Calculation) model.
	IMsPooledModelTransform	The IMsPooledModelTransform interface is used to work with panel data regression model.
	IMsProblem	The IMsProblem interface is used to work with a modeling problem.
	IMsProblemCalculation	The IMsProblemCalculation interface is used to work with the object calculating the modeling problem.
	IMsProblemCalculationCallback	The IMsproblemCalculationCallback interface contains methods that implement modeling container events.
	IMsProblemCalculationProxy	The IMsProblemCalculationProxy interface is used to set up parameters of modeling problem remote calculation.
	IMsProblemCalculationSettings	The IMsProblemCalculationSettings interface is used to set up problem calculation parameters.
	IMsProblemDetails	The IMsProblemDetails interface is used to work with modeling problem calculation parameters.
	IMsProblemDetailsArray	The IMsProblemDetailsArray interface is used to work with the collection of problem calculation parameters.
	IMsProblemDimensionFix	The IMsproblemDimensionFix interface contains properties of fixed dimensions' collection.
	IMsProblemScenarios	The IMsProblemScenarios interface contains properties and methods used to work with the collection of modeling problem scenarios.
	IMsProblemVariablesReport	The IMsproblemVariablesReport interface is used to work with a report on modeling problem variables.
	IMsRamseyRessetTestSettings	The IMsRamseyRessetTestSettings interface is used to work with parameters of the Functional Form Criterion diagnostic test.
	IMsRedundantVariablesTestSettings	The IMsRedundantVariablesTestSettings interface is used to work with parameters of the Redundant Variables Criterion diagnostic test.
	IMsResultObject	The IMsResultObject interface is used to work with method calculation results.
	IMsRFormulaTerm	The IMsRFormulaTerm interface is used to work with expression element used in the R model.
	IMsRTransform	The IMsRTransform interface is used to set up parameters of the R model.
	IMsScenario	The IMsScenario interface contains properties of modeling container scenario.
	IMsScenarioDimension	The IMsScenarioDimension interface contains methods for working with scenario dimension.
	IMsScenarios	Outdated. The IMsScenarios interface contains properties and methods of a collection of modeling container scenarios.
	IMsProblemVariablesReport	The IMsproblemVariablesReport interface is used to work with a report on modeling problem variables.
	IMsScenarioTreeElement	The IMsScenarioTreeElement interface contains properties of element of scenarios tree corresponding to modeling container scenario.
	IMsScenarioTreeEntries	The IMsScenarioTreeEntries interface contains properties and methods used to work with scenario tree on a given hierarchy level.
	IMsScenarioTreeEntry	The IMsScenarioTreeEntry interface contains basic properties of scenario tree elements.
	IMsScenarioTreeFolder	The IMsScenarioTreeFolder interface contains properties of scenario tree folder.
	IMsSerialCorellationLMTestSettings	The IMsSerialCorellationLMTestSettings interface is used to work with parameters of the Godfrey Criterion of Residual Autocorrelation diagnostic test.
	IMsSlideSmoothingTransform	The IMsSlideSmoothingTransform interface contains properties and methods that determine model calculation parameters by means of moving average method.
	IMsSpliceFormulaTerm	The IMsSpliceFormulaTerm interface contains properties and methods used to work with a spliced series.
	IMsSpliceTransform	The IMsSpliceTransform interface contains properties and methods used to work with parameters of model that splices series.
	IMsStochasticMethod	The IMsStochasticMethod interface is a base interface for all stochastic methods of model calculation.
	IMsStringGenerator	The IMsStringGenerator interface contains properties and methods used to work with string view generator.
	IMsStubLoadSelectionValue	The IMsStubLoadSelectionValue interface is used to work with selection in data source used to load data on modeling problem calculation.
	IMsStubLoadSelectionValues	The IMsStubLoadSelectionValues interface is used to work with the collection of selections in data sources used to load data on problem calculation.
	IMsTargetConstraint	The IMsTargetConstraint interface is used to work with criterion function constraint.
	IMsTargetConstraintCommon	The IMsTargetConstraintCommon interface is used to work with criterion problem constraint.
	IMsTargetConstraintInfo	The IMsTargetConstraintInfo interface is used to work with criterion function constraint value.
	IMsTargetConstraintInfoArray	The IMsTargetConstraintInfoArray interface is used to work with the collection of values for criterion function constraint.
	IMsTargetConstraints	The IMsTargetConstraints interface is used to work with the collection of criterion function constraints.
	IMsTargetFormulaTerm	The IMsTargetFormulaTerm interface is used to set up parameters of expression elements (terms) used in criterion problem.
	IMsTargetProblem	The IMsTargetProblem interface is used to set up criterion problem calculation parameters.
	IMsTargetVarConstraint	The IMsTargetVarConstraint interface is used to work with variable constraint.
	IMsTargetVarConstraints	The IMsTargetVarConstraints interface is used to work with the collection of variable constraints.
	IMsTermOptions	The IMsTermOptions interface determines advanced term parameters.
	IMsTimeMatrix	The IMsTimeMatrix interface is used to work with matrix.
	IMsTransformationProblem	The IMsTransformationproblem interface contains properties used to set up transformation problem settings.
	IMsTransformObject	The IMsTransformObject interface is used to work with object used by calculation method.
	IMsTransformObjectList	The IMsTransformObjects interface contains properties and methods used to work with the collection of objects used by calculation method.
	IMsTransformSeries	The IMsTransformSeries interface is used to work with data by basic model series.
	IMsTransformStringGenerator	The IMsTransformStringGenerator interface contains properties and methods used to work with string view generator to calculate parameters.
	IMsTslsResult	The IMsTslsResult interface is used to work with calculation results of linear regression (instrumental variables estimation).
	IMsUnitInfo	The IMsUnitInfo interface is used to work with units.
	IMsUserMethodParam	The IMsUserMethodParam interface contains properties of parameter of a model that uses user algorithm.
	IMsUserMethodParams	The IMsUserMethodParams interface contains properties and methods used to work with the collection of parameters of a model that uses user algorithm.
	IMsUserMethodTemplate	The IMsUserMethodTemplate interface contains properties of user method template used in modeling container.
	IMsUserMethodTemplateParam	The IMsUserMethodTemplateParam interface contains properties of user method template parameter.
	IMsUserMethodTemplateParams	The IMsUserMethodTemplateParams interface contains properties and methods used to work with the collection of parameters of user method templates.
	IMsUserMethodTemplates	The IMsUserMethodTemplates interface contains properties and methods used to work with the collection of user method templates used in modeling container.
	IMsUserTransform	The IMsUserTransform interface contains properties and methods that determine model calculation parameters using a custom method.
	IMsUserTransformImplementation	The IMsUserTransformImplementation interface implements the method that calculates a model using a user-defined algorithm.
	IMsValueAtRiskBacktesting	The IMsValueAtRiskBacktesting interface is used to work with backtesting parameters.
	IMsValueAtRiskBacktestingResult	The IMsValueAtRiskBacktestingResult interface contains properties that return backtesting results.
	IMsValueAtRiskTransform	The IMsValueAtRiskTransform interface is used to work with Value-At-Risk model calculation parameters.
	IMsVariable	The IMsVariable interface contains properties of the Variable development environment component.
	IMsVariableDimension	The IMsVariableDimension interface contains properties of additional dimension of output variable.
	IMsVariableDimensions	The IMsVariableDimensions interface contains properties and methods of additional dimensions of the modeling variable.
	IMsVariableList	The IMsVariableList interface contains properties and methods used to work with the list of modeling variables.
	IMsVariableLoadSettings	The IMsVariableLoadSettings interface contains properties and methods that determine parameters of loading data to variable using a formula.
	IMsVariables	The IMsVariables interface contains properties and methods of the collection of variables.
	IMsVariableSampling	The IMsVariableSampling interface contains properties used to set calculation step in variable's structure.
	IMsVariableStub	The IMsVariableStub interface contains properties and methods used to work with an abstract data source.
	IMsVariableTest	The IMsVariableTest interface is used to calculate the descriptive statistics.
	IMsVariableTestData	The IMsVariableTestData interface is used to work with the variable, for which the descriptive statistics is calculated.
	IMsVariableTestDataList	The IMsVariableTestDataList interface is used to work with the collection of variables, to which the descriptive statistics is calculated.
	IMsVariableTestResults	The IMsVariableTestResults interface is used to work with the results of calculating the descriptive statistics.
	IMsVariableTestSettings	The IMsVariableTestSettings interface is used to set up common parameters of descriptive statistics calculation.
	IMsVectorMethod	The IMsVectorMethod interface is a base interface for all series methods of model calculation.
	IMsWhiteHeteroskedasticityTestSettings	The IMsWhiteHeteroskedasticityTestSettings interface is used to work with parameters of the White diagnostic test for heteroscedasticity.
	IMsX11Result	The IMsX11Result interface is used to work with calculation results of the X11 method.
	IPCABox	The IPCABox interface contains properties and methods of the PCABox development environment component.
	ITimeSeries	The ITimeSeries interface is used to pass data series to user calculation method.
	IUiModel	The IUiModel interface contains properties and methods of thenbsp; UiModel file.
	IValidation	The IValidation interface contains properties and methods used to work with validation rule.
	IValidationComparisonValue	The IValidationComparisonValue interface contains properties used to work with compared values.
	IValidationComponent	The IValidationComponent interface is used to work with component series with calculated validation.
	IValidationComponentMismatch	The IValidationComponentMismatch interface is used to work with validation rule of the Components Deviations Analysis type.
	IValidationCorrelation	The IValidationCorrelation interface is used to work with validation rule of the Correlation Dependency Analysis type.
	IValidationCrossDatabase	The IValidationCrossDatabase interface is used to work with parameters of the Compare with Time Series Database validation rule.
	IValidationCrossDatabaseMapping	The IValidationCrossDatabaseMapping interface is used to work with dimension binding of mapped data sources.
	IValidationCrossDatabaseMappings	The IValidationCrossDatabaseMappings interface is used to work with collection of bindings set for dimensions of mapped data.
	IValidationCrossFrequency	The IValidationCrossFrequency interface is used to work with validation rule of the Compare Frequency Levels type.
	IValidationCustom	The IValidationCustom interface is used to work with validation rule of the Compare by Expression type.
	IValidationCustomDimensionsBinding	The IValidationCustomDimensionsBinding interface is used to work with dimension binding.
	IValidationCustomMapping	The IValidationCustomMapping interface is used to work with mapping of data sources used in validation rule of the Compare by Expression type.
	IValidationCustomMappings	The IValidationCustomMappings interface is used to work with the mapping collection of data sources used in the validation rule of the Compare by Expression type.
	IValidationDateSettings	The IValidationDateSettings interface contains properties used to determine parameters of validation calculation date.
	IValidationDetails	The IValidationDetails interface is the base one and is used to work with validation rule settings.
	IValidationException	The IValidationException interface is used to work with the series that does not correspond to the validation rule.
	IValidationExceptions	The IValidationexclusions interface contains properties used to work with the collection of series that do not correspond to the validation rule.
	IValidationExecuteSettings	The IValidationExesliceeSettings interface determines validation calculation settings.
	IValidationFilter	The IValidationFilter interface contains properties and methods used to work with validation rule.
	IValidationFilters	The IValidationFilters interface includes properties and methods used to work with the collection of validation filters.
	IValidationGroup	The IValidationGroup interface contains properties and methods used to work with the group of validation rules.
	IValidationGrowthRate	The IValidationGrowthRate interface is used to work with validation rule of the Growth Rate Analysis type.
	IValidationLevel	The IValidationLevel interface is used to work with validation rule of the Compare with Number type.
	IValidationMetaAttributes	The IValidationMetaAttributes interface contains properties and methods used to work with the collection of attributes required to validate data.
	IValidationMissingData	The IValidationMissingData interface is used to work with validation rule of the Missing Data type.
	IValidationMissingMetadata	The IValidationMissingMetadata interface is used to work with validation rule of the Missing Metadata type.
	IValidationRatio	The IValidationRatio interface is used to work with validation rule of the Compare Observations Relations type.
	IValidationRevisionComparison	The IValidationRevisionComparison interface is used to work with validation rule of the Compare Data Versions type.
	IValidationRevisionMetadataComparison	The IValidationRevisionMetadataComparison interface is used to work with validation rule of the Metadata Version Comparison type.
	IValidationSelectionFilter	The IValidationSelectionFilter interface is used to work with the filter limiting series checked by validation rule.
	IValidationSelectionValue	The IValidationSelectionValue interface is used to work with element of data set used for validation.
	IValidationSelectionValueList	The IValidationSelectionValueList interface is used to determine data set used for validation.
	IValidationSelectionValues	The IValidationSelectionValues interface is used to work with filter element, which limits series checked by validation rule.
	IValidationStatisticalOutliers	The IValidationStatisticalOutliers interface is used to work with validation rule of the Statistical Outliers Analysis type.
	IValidationTrend	The IValidationTrend interface is used to work with validation rule of the Compare Trends type used for trend comparison of the specified series.
	IValidationUserComponent	The IValidationUserComponent interface is used to work with user validation component.
	IValidationUserComponents	The IValidationUserComponents interface is used to work with the collection of user validation components.